Industrial Heat Sealers

Explosion Proof Sealers
All Aline vacuum sealers come with a 2-year warranty!

Explosion proof or hazardous location sealers for all div & class requirements. Machines can be manufactured horizontally or vertically, with or without vacuum, and in either powder coat or all stainless. There is no restriction on size or length of the sealer. Each sealer can be manufactured to any length or orientation required. Each Unit is pressurized and comes standard with safety vents, auto shutoff, and optional audible alarm. This guarantees maximum protection for your employees and facility.
Please call for pricing, 336-683-9834

explosion proof vertical sealer
Explosion Proof Vertical Vacuum Sealer
Available in all sizes


Aline Explosion-Proof Sealer

Each unit is designed custom to your specification.

We provide dependable explosion proof sealer models that meet all Class, Division and Group requirements. We offer both bar sealers and hand sealers to meet your individual requirements.

All seal areas are designed with constant heat bars that are sunk into aluminum to eliminate any potential external spark. Redundant heat run away is protected through secondary thermocouples which will turn the power off if heat rises above a predetermined temperature.

Each cabinet with electrical components is maintained at positive pressure with redundant safety features including automatic shut down of power (where required).

If you are in the market for an explosion proof sealer, we offer the following options…

bulletHorizontal or vertical designs
bulletDesigns with or without vacuums
bulletPowder coated or stainless steel constructed
bulletNo restrictions on size or length

If you are in an explosive environment – whether gas, vapors or powders -- you cannot afford to not use an explosion proof sealer with exacting standards. To ensure the greatest amount of safety possible, each of our sealers is pressurized and comes standard with safety features such as auto shutoff, temperature runaway and vents. An audible alarm is also available.

Heavy Duty Circular Sealers


Available with PLC and touchscreen controls!
Circular valve sealers for industrial and medical applications. Circular sealers range in size from ½" to 24" valves, along with multiple valves.
Dual Circular Sealer with Interchangeable Seal Dies
Dual Circular Sealer with
Interchangeable Seal Dies
Water Cooled Circular Dies

Water Cooled Circular Dies

Multiple Element Sealer
HD-0 Circular Sealer

97 inch sealer with 1/4 inch seal and cut
HD Circular Sealer
97 inch sealer with 1/4 inch seal and cut
HD Circular Sealer

Ideal for Medical, Pharmaceutical and Industrial sealing applications!

 
4 station circular sealer
4 Station Circular Sealer

Custom Rotary Sealer

Custom semi-automated rotary sealer. Each sealer is PLC-HMI operated and is ideal for medical applications where validation is required or for industrial use. Sealers can be designed for constant heat or thermal impulse applciations. The number of seal stations can be customized based on user requirements. Activation can be either with a foot pedal or dual palm buttons. Redundant safety features are incorporated into the design of each machines. A camco indexer ensures the highest degree of accuracy during the seal process.

Custom Rotary Sealer

Custom Rotary Sealer

Custom Rotary Sealer

                          Blister Sealer

Specifications *

DIMENSIONS:
Length....................68-1/4" (173.36 cm)
Overall Height.......54-3/4" (139.07 cm)
Working Height......34-7/8" (88.58 cm)
Width.....................22-5/16" (56.67 cm)
Platen (Teflon Coated...............20"x18"
                           (50.80 cm x 45.72 cm)
Sealing Station Jig..23"L x 19-3/16"W
                           (58.42 cm x 48.74 cm)
Maximum Blister Depth..6" (15.24 cm)

Speed.........Up to 10 cycles per minute
Power......220/1/60-50 cycles, 20 amps
Finish...............................Powder Coat
Casters.4" Dia. Lkng Whls (10.16 cm)
Shipping Weight......200 lbs. (90.9 kg)
              

Ideal for drugstores, hospital pharmacies and for packaging products for clinical trials and samples.

Features and Specifications
 

Digital heat control. Heavy-gauge welded steel
construction.
Teflon-coated platen. Solid state controls throughout.
Air pressure gauge and regulator. Photo electric activated platen.

Shuttle Blister Sealer

Custom Tabletop Model

We will design your custom tabletop shuttle sealers.

 

Entry Level Shrink Wrap Machines

We are pleased to offer four low cost, effective shrink wrap machines ideal for low volume, start-up, or budget-conscious operations.
 
MODEL EKH-238 EKH-346 EKH-455 EKH-680
SEAL DIMENSION 11 X 15" 12.5 X 18" 16.5 X 21.5" 24.4 X 21.5"
MAX HEIGHT OF PACKAGE 4.7" 4.7" 9.8" 9.8"
         
ELECTRICAL(CHOICE) 110V/18 AMPS 110V/18 AMPS - -
  240V/10 AMPS 240V/10 AMPS 240V/16 AMPS 240/380/400V/10 AMPS
PHASE SINGLE SINGLE SINGLE THREE
HERTZ 50-60 50-60 50-60 50-60
HEATERS (3 EACH) 600 WATTS 600 WATTS 750 WATTS 1300 WATTS
MOTOR 1/4 HP (ONE) 1/4 HP (ONE) 1/2 HP (ONE) 1/2 HP (TWO)
         
MACHINE SIZE(INCHES) 32 X 23 X 20 36 X 25 20 38 X 30 X25 60 X 39 X 25
NET WEIGHT 140 LBS. 155 LBS. 250 LBS. 265 LBS.
SHIPPING WEIGHT(EST.) 210 LBS. 220 LBS. 330 LBS. 375 LBS.
         
PRICE (F.O.B. CERRITOS, CA.) $2,090.00 $2,990.00 $3,590.00 $6,590.00
OPTIONAL STAND $125.00 $125.00 $160.00 $160.00
         
STANDARD FEATURES:
IMPULSE SEALER
FILM DISPENSER
ADJUSTABLE PERF WHEELS
SEPARATOR TRAY
TABLE TOP DESIGN
MAGNETIC LOCKDOWN
TRANSPARENT LID
ADJUSTABLE CHAMBER HEIGHT
MULTIPLE MODES OF OPERATION

Unitized Shrink Wrapping Systems

The UNITIZED SHRINK WRAPPING MACHINE is a versatile, new generation shrink wrap machine, engineered for high speed, high efficiency HEAT SEALING AND SHRINKING OF ALL FILMS. Completely self-contained, sequencing of each step is controlled automatically. Solid state dependability. No air supply required. Simply plug in and run. The counter balanced, heavy duty, right angle L-Sealer frame locks automatically when lowered over an item of any configuration. A sealing wire sensor provides the correct amount of heat sealing pressure for a prescribed period of time, then opens the sealing head automatically to accept the next package. An automatic hole burner allows trapped air to escape when desired and is standard equipment.

Sealed package is then conveyed on an open mesh, Teflon-coated conveyor belt into the thermostatically controlled, dual heat, high energy shrink tunnel. Conveyor belt features variable speed control with automatic load compensation benefits. Result: an economical, shrink wrapped package conforming to physical outline of packaged item. Inexperienced personnel can operate the machine at maximum production rates.



Unitized Shrink Wrapping Machine for heat sealing and shrinking of all films. Model 1424-ST.

Unitized Shrink Wrapping Machine for heat sealing and shrinking of all films. Model 2428-ST.

Unitized Shrink Wrapping Machine for heat sealing and shrinking of all films. Model 3252-ST.

The 1424-ST Unitized Shrink Wrapping System is perfect for  a wide variety of shrink wrapping applications worldwide.  Each machine is built to exacting specifications and the serviceability and reliability are second to none in the shrink wrapping industry.

A long history of designing and manufacturing top quality, rugged and reliable heat shrink machinery and equipment.
These Heat Seal machines are proudly made by craftsmen in the United States of America and are backed by the best warranty in the shrink wrapping industry.

When you need reliable, affordable shrink wrapping machinery or equipment, there is only one logical choice...

Shrink Wrapping Systems!

 MODEL 1424-ST  

Overall Dimensions: 101"L x 48"W x 52"H           
256.54 cm x 121.92 cm x 132.08 cm  
Tunnel Opening: 9"H x 24"W x 24"L 
22.86 cm x 60.96 cm 60.96 cm
L-Sealer Frame:  24" x 14" 
60.96 cm x 35.56 cm   
Power:   220/208/1/40A  
Wrapping Speed:   Up to 20 packages per minute. 
Finish:   Powder Coat.
Casters:   4" Diameter. (10.16 cm) 
One locking wheel.  
Shipping Weight: 500 lbs. (226.50 Kilograms) 

STANDARD FEATURES

 MODEL 2428-ST  **Unitized Shrink Wrap System

Overall Dimensions: 130"L x 48"W x 55"H        
330.20. cm x 121.92 cm x 139.70 cm
Tunnel Opening: 9"H x 24"W x 42"L 
22.86 cm x 60.96 cm x 106.68 cm
L-Sealer Frame:  24" x 28" 
60.96 cm x 71.12 cm
Power:   220/208/1/40A
220/208/3/40A   440/3/20A  
Wrapping Speed:   Up to 20 packages per minute. 
Finish:   Powder Coat.
Casters:   4" Diameter. (10.16 cm) 
One locking wheel.  
Shipping Weight: 600 lbs. (271.80 Kilograms)   

 

 MODEL 3252-ST  **

Overall Dimensions: 176"L x 60"W x 55"H   
447.04.cm x 152.40 cm x 139.70 cm
Tunnel Opening: 9"H x 31"W x 42"L 
22.86 cm x 78.74 cm x 106.68 cm
L-Sealer Frame:  30" x 52"
76.20 cm x 132.08 cm
Power:   220/208/1/50A
220/208/3/40A    440/3/20A
Wrapping Speed:   Up to 15 packages per minute. 
Finish:   Powder Coat.
Casters:   4" Diameter. (10.16 cm) 
One locking wheel.  
Shipping Weight: 800 lbs. (362.40 Kilograms)
1424-ST $7,950
2428-ST $8,950
2428-T (Tunnel Only) $6,950
2428-S (Sealer Only) $6,950
3252-ST $15,900
3252-T (Tunnel Only) $9,950
3252-S (Sealer Only) $8,950
OPTIONS
4" Higher Tunnel: add $550
330/440/480 Volts: add $850
All prices are ex-works and exclude Crating, Freight, and North Carolnia State Tax.
Prices subject to change without notice. 

Individual Sealers

This outstanding Sealer is a semi-automatic machine engineered to SEAL ALL FILMS for heat sealing applications. All sequences are performed automatically.  No air line required. Features a right angle impulse sealer frame; sealing wire sensor; quick adjust loading shelf; Teflon-coated, open mesh conveyor belt with built-in controls for speed and load capacities. Unit is compatible with ALINE Tunnels. 

Semi-automatic sealer. Seals all films for heat sealing applications

STANDARD FEATURES

Cool-down and shut-off on all tunnels.

Supports All films/Tunnel Heat Control

Speed belt control with automatic load compensation

Solid State Controls Throughout.

Relays are mercury, hermetically sealed.

Adjusting, stainless steel loading shelf and film sep.

Belt is silent and safe. Open mesh glass fiber, coated with Teflon.

Welded sealing frame for positive alignment.

Uses recycled air for maximum energy efficiency.

Magnetic sealing frame/-away conveyor on sealer.

 

GENERAL SPECIFICATIONS*

 

 

 MODEL 2428-S     

MODEL 3252-S

Overall Dimensions: 
(On Casters)

82"L x 48"W x 44"H   
208.28 cm x 121.92 cm x 111.76 cm 

137"L x 60"W x 44"H
347.98 cm x 152.40 cmx 111.76 cm

 

 

 

L-Sealer Frame:

24" x 28"   

 30" x 52"

 

60.96 cm x 71.12 cm 

76.20 cm x 132.08 cm

Power:

220/208/1/15A 

 220/208/1/15A

Wrapping Speed:

Up to 20 packages per minute.    

Up to 15 packages per minute.

Finish:

 Powder Coat. 

Powder Coat.

Casters:

4" Diameter. (10.16 cm)   

 4" Diameter. (10.16 cm)

 

One locking wheel.    

One locking wheel.

Shipping Weight:

300lbs. (135.90 Kilograms)  

 500 lbs.(226.50 Kilograms)

Individual Tunnels

Unequalled in performance. High efficiency, heat shrink tunnel shrinks ALL FILMS over objects of any configuration. The Shrink Tunnel is fully automatic with built-in controls to maintain trouble-free, long lasting performance. Features an open mesh, Teflon-coated conveyor belt for long life performance.


Speed and load capacities are regulated to meet production requirements. Shrink Tunnel is compatible with most sealers.

Model 2428-T Shrink Tunnel for shrinking of all films

 

STANDARD FEATURES

Cool-down and shut-off on all tunnels. Supports All films/Tunnel Heat Control
Speed belt control with automatic load compensation Solid State Controls Throughout.
Relays are mercury, hermetically sealed. Adjusting, stainless steel loading shelf and film sep.
Belt is silent and safe. Open mesh glass fiber, coated with Teflon. Welded sealing frame for positive alignment.
Uses recycled air for maximum energy efficiency. Magnetic sealing frame/-away conveyor on sealer.
  GENERAL SPECIFICATIONS*  
  MODEL 2428-T     MODEL 3252-T
Overall Dimensions: 
(On Casters)
65"L x 28"W x 55"H     65"L x 35"W x 55"H
   165.10 cm x 71.12 cm x 139.70 cm 165.10 cm x 88.90 cm x 139.70 cm
Tunnel Opening: 9"H x 24"W x 42"L    9"H x 31"W x 42"L
  22.86 cm x 60.96 cm x 106.68 cm  22.86 cm x 78.74 cm x 106.68 cm
Power: 220/208/1/40A   220/208/1/50A
  220/208/3/40A      440/3/20A     220/208/3/40A      440/3/20A
Finish:  Powder Coat.  Powder Coat.
Casters: 4" Diameter. (10.16 cm)     4" Diameter. (10.16 cm)
  One locking wheel.     One locking wheel.
Shipping Weight: 300lbs. (135.90 Kilograms)    400 lbs. (181.20 Kilograms)

Heavy Duty Thermal Impulse Bag Sealers are industrial quality machines constructed from welded steel.  All bag sealers are pneumatically powered and calculated to provide an airtight/watertight seal.  Each bag sealer unit features a low pressure safety close and redundant emergency stop features.  The sealers an be constructed as tabletop units or in seal lengths of up to 240 inches.  Each bag sealer is ideal for sealing ranges of material including polyethylene, laminated films, nylon and even Teflon.  Sealers are available in either standard thermal impulse or with repeatable and verifiable controls for medical or specialty applications.

Every sealer is an ideal replacement for all VERTROD STYLE machinery.

Vertical Vacuum Sealers - Are ideal for tall packages or freestanding liners in drums or boxes.The sealing jaw is height adjustable and perfect for manual or conveyor operations.

OPTIONS INCLUDE:

Standard or validate-able impulse sealer
Flat Band Elements(1/8, 3/16, 1/4, or 1/2 inch)
Round wire cut-off
Cold or Hot-wire cut
Scrap blow off
Flying Knife
Dual or multiple elements
Water Cooled bars
Water Chiller
Opti-Touch safety Switches
110 or 220 Volts
Custom Options Available
 

vertical vacuum sealer at 100 inches!

 
Compact Vertical Impulse Bag Sealer
Compact Vertical 30" Sealer with Open Throat
Heavy Duty Vertical Impulse Bag Sealer
Heavy Duty Vertical Bag Sealer
Available in
30", 36", 42", 48", 60", 72", 84", and 96" widths

Heavy Duty Long Line Impulse sealer!  Horizontal Vacuum Sealers- Are open back feed thru offset bag sealers. Material can be introduced from front-to-back or side-to-side

Heavy Duty impulse sealer at up to 300 inches in length!
Aline Heavy Duty Sealers are available in up to 300 Inch Lengths!
horizontal bag sealer Heavy Duty Digital Long Line Sealer
Horizontal Bag Sealer
w/Direct Drive
 

 

Heavy Duty Digital Long Line Sealer
Available in 36-48-60-72-84-96" Lengths
click on image to zoom
Horizontal Sealer with Temperature Control Heavy Duty Long Line Sealer with T.I.C.

HD-36DD
Horizontal Sealer w/Temperature Control
click on image to zoom

Heavy Duty Long Line Sealer with T.I.C.
Available in 36-48-60-72-84-96 Inch Lengths
click on image to zoom

  HEAVY DUTY HORIZONTAL SEALERS
Seal Seal Machine 3/8 or 1/2" Top & bottom Pneumatic  Water cooled 
Model # Length Width Price Seal Width Elements Flying Knife  Seal Bar 
HD-36 36" up to 1/4"  $  7,800.00  $    400.00  $      525.00  $  1,800.00  $        425.00
HD-48 48" up to 1/4"  $  8,950.00  $    400.00  $      550.00  $  2,100.00  $        450.00
HD-60 60" up to 1/4"  $  9,850.00  $    400.00  $      550.00  $  2,100.00  $        475.00
HD-72 72" up to 1/4"  $10,850.00  $    400.00  $      600.00  $  2,400.00  $        500.00
HD-84 84" up to 1/4"  $11,850.00  $    400.00  $      650.00  $  2,800.00  $        525.00
HD-96 96" up to 1/4"  $12,900.00  $    400.00  $      650.00  $  3,600.00  $        550.00
ALSO AVAILABLE 110, 120, 144, 168, 175, 200 & 300 INCHES BY QUOTE ONLY.
HD-36DD 36" up to 1/4"  $  8,900.00  $    400.00  $      525.00  $  1,800.00  $        425.00
HD-48DD 48" up to 1/4"  $  9,900.00  $    400.00  $      550.00  $  1,900.00  $        450.00
HD-60DD 60" up to 1/4"  $10,900.00  $    400.00  $      550.00  $  2,100.00  $        475.00
HD-72DD 72" CALL FOR QUOTE
HD-84DD 84" CALL FOR QUOTE
HD-96DD 96" CALL FOR QUOTE
HD-120DD 120" CALL FOR QUOTE

 

Contour and Heavy Duty Tabletop Sealers
with repeatable and verifiable
temperature controls!

Available with PLC and touchscreen controls!

Complex contour sealers.We can provide sealers for multiple, straight, or curved seal patterns and seal circular valves or eliptical shaped fittings. Each sealer is temperature controlled for guaranteed repeatability and consistent seals. Designs can range from tabletop machines to very large floor models or shuttle equipment. Each machine can be fully customized to meet your application.

Multiple Element Sealer

97 inch sealer with 1/4 inch seal and cut
Multiple Contour Element Sealer 97" Square Sealer with 1/4" seal and cut
Heavy duty 20 inch dual element heat sealer

Heavy Duty 20 inch Dual Element Heat Sealer 


HD Contour Sealer
For all shapes
with PLC and TouchScreen 
12 dual element bar sealer

12" Dual Element Bar Sealer

4 inch bar sealer
4" Bar Seal
Heavy Duty Contour Sealer
Heavy Duty Conture Sealer
corner sealer w/ cut wire
Corner Sealer with cut wire

Ideal for Medical, Pharmaceutical and Industrial sealing applications!

HD-20 20" up to 1/4"  $  6,200.00
HD-25 25" up to 1/4"  $  6,500.00
HD-30 30" up to 1/4"  $  6,900.00
HD-35 35" up to 1/4"  $  7,450.00
ADDITIONAL OPTIONS FOR ABOVE MACHINES:
  TEMPERATURE CONTROL: ADD $1900.00
DIGITAL WATER CHILLER : ADD $2,850.00
HOT OR COLD CUT TRIM WIRE: ADD $200-400
VACUUM PACKAGE: SEE VACUUM SEALER SECTION
ELECTRIC ACTUATOR FOR VERTICAL UNITS
PNEUMATIC BAG SPREADER

 

Hand Held Impulse sealers are ideal for sealing polyethylene and laminated foils. Applications include sealing around oddly shaped products including drum or box liners or for sealing around large objects such as furniture.
  Each sealer is lightweight and portable. The operator simply squeezes the handles to open the jaws and clamps on to the film being sealed. A start button located on the seal jaw is activated. An indicator light on the main housing signals the start and finish of the seal cycle. 

  The heat cycle is controlled by a timer on the main housing. The operator simply increases or decreases the heat as desired. Upon completion of the cycle, the operator again squeezes the jaw, releasing the sealed product. All controls are solid state. An eight foot power line cord and eight foot sealer cord is standard.

  Options include flat band elements (1/8, 3/16, ¼ or ½ inch), wire cut elements, or a cold cut wire. A 220 Volt option is also available. Each unit comes complete with a two-year warranty, detailed operating instructions, and a spare parts kit.


Model "B" (T Clamp) is available in 8, 12, 15, 18, and 26" lengths.
Model "S" (Scissor Sealer) is available in 6 or 10" lengths. 
B-8 8" T-CLAMP  $            750.00
B-12 12" T-CLAMP  $            780.00
B-15 15" T-CLAMP  $            810.00
B-18 18" T-CLAMP  $            855.00
B-26 26" T-CLAMP  $         1,390.00
S-6 6" SCISSOR  $            710.00
S-10 10" SCISSOR  $            730.00
EPT PNEUMATIC T CLAMP  TBD 
EPS PNEUMATIC SCISSOR SEALER  TBD 
OPTIONS:  DUAL ELEMENT  $            275.00
3/8 OR 1/2" ELEMENT   $            250.00
QUICK DISCONNECT  $            150.00
SECOND HANDSET (QUICK DISCONNECT REQ'D)               QUOTE 
220 VOLTS  $            300.00
DIGITAL TEMPERATURE CONTROL  $         1,300.00

 

Ergonomic Hand Held Impulse Sealer

Ergonomic Hand Held Impulse Sealer.

Each sealer is pnuematically operated and only requires the operator to push a button in order to trigger the seal cycle.

The sealer is available in a T-clamp style in widths of 8", 12", and 15" and as a scissor sealer in lengths of 6" and 10".

Please contact us for pricing.

Home

NEUMANN PACKAGING SERVICES
1765 Pine Grove Drive,
Asheboro, North Carolina 27205
Phone: 336-683-9834 /  Fax: 336-683-9833 / E-mail: neumannpack@triad.rr.com